E+H Proline Promass F 300 Coriolis flowmeter,

Flowmeter with premium accuracy, robustness and a compact, easily accessible transmitter

• Measuring principle

  Coriolis

• Product headline

  Flowmeter with premium accuracy, robustness and a compact, easily accessible transmitter.
  Highest measurement performance for liquids and gases under varying, demanding process conditions.

• Sensor features

  Highest process safety – immune to fluctuating and harsh environments. Fewer process measuring points – multivariable measurement (flow, density, temperature). Space‐saving installation – no in-/outlet run needs.
  Mass flow: measurement error ±0.05 % (PremiumCal). Medium temperature: –196 to 350 °C (–320 to 662 °F). Nominal diameter: DN 8 to 250 (³⁄₈ to 10").

• Transmitter features

  Full access to process and diagnostic information – numerous, freely combinable I/Os and fieldbuses. Reduced complexity and variety – freely configurable I/O functionality. Integrated verification – Heartbeat Technology.
  Compact dual-compartment housing with up to 3 I/Os. Backlit display with touch control and WLAN access. Remote display available.

• Nominal diameter range

  DN 8 to 250 (⅜ to 10")

• Wetted materials

  Measuring tube: 1.4539 (904L); 1.4404 (316/316L); Alloy C22, 2.4602 (UNS N06022)
  Connection: 1.4404 (316/316L); Alloy C22, 2.4602 (UNS N06022); 1.4301 (F304)

• Measured variables

  Mass flow, density, temperature, volume flow, corrected volume flow, reference density, concentration

• Max. measurement error

  Mass flow (liquid): ±0.10 % (standard), 0.05 % (option)
  Volume flow (liquid): ±0.10 %
  Mass flow (gas): ±0.25 %
  Density (liquid): ±0.0005 g/cm³

• Measuring range

  0 to 2 200 000 kg/h (0 to 80 840 lb/min)

• Max. process pressure

  PN 100, Class 600, 63K

• Medium temperature range

  Standard: –50 to +150 °C (–58 to +302 °F)
  Option: –50 to +240 °C (–58 to +464 °F)
  High temperatur option: –50 to +350 °C (–58 to +662 °F)
  Option: –196 to +150 °C (–320 to +302 °F)

• Ambient temperature range

  Standard: –40 to +60 °C (–40 to +140 °F)
  Option: –50 to +60 °C (–58 to +140 °F)

• Sensor housing material

  Standard: 1.4301 (304)
  Option: 1.4404 (316/316L)

• Transmitter housing material

  AlSi10Mg, coated; 1.4409 (CF3M) similar to 316L; stainless steel for hygenic transmitter design

• Degree of protection

  Compact version: IP66/67, type 4X enclosure.
  External WLAN antenna: IP67
  IP69

• Display/Operation

  4-line backlit display with touch control (operation from outside)
  Configuration via local display and operating tools possible
  Remote display available

• Outputs

  3 outputs:
  4-20 mA HART (active/passive)
  4-20 mA WirelessHART
  4-20 mA (active/passive)
  Pulse/frequency/switch output (active/passive)
  Double pulse output (active/passive)
  Relay output

• Inputs

  Status input
  4-20 mA input

• Digital communication

  HART, PROFIBUS DP, PROFIBUS PA, FOUNDATION Fieldbus, Modbus RS485, PROFINET, PROFINET over Ethernet-APL, Ethernet/IP, OPC-UA

• Power supply

  DC 24 V
  AC 100 to 230 V
  AC 100 to 230 V / DC 24 V (non-hazardous area)

• Hazardous area approvals

  ATEX, IECEx, cCSAus, NEPSI, INMETRO, EAC, UK Ex, KC

• Product safety

  CE, C-tick, EAC marking

• Functional safety

  Functional safety according to IEC 61508, applicable in safety-relevant applications in accordance with IEC 61511

• Metrological approvals and certificates

  Calibration performed on accredited calibration facilities (acc. to ISO/IEC 17025)
  Heartbeat Technology complies with the requirements for measurement traceability according to ISO 9001:2015 – Section 7.1.5.2 a (TÜV SÜD attestation)
  MI-005 (Liquids other than water, Hydrocarbons, LPG, cryogenic liquids)
  NTEP (Liquids other than water, LPG, cryogenic liquids)
  MC (Liquids other than water, gases, cryogenic liquids)
  MI-002, PTB

• Marine approvals and certificates

  LR approval, DNV approval, ABS approval, BV approval, CCS approval

• Pressure approvals and certificates

  PED, CRN, AD 2000

• Material certificates

  3.1 material
  NACE MR0175/MR0103, PMI; welding test acc. to EN ISO, ASME, NORSOK

• Hygienic approvals and certificates

  3-A, EHEDG, cGMP

Choose from our suggested options

Sales price

• Preselection

• 80

• 50

• 40

• 2F

• 25

• 1H

• 1F

• 15

• 08

• Promass F 300, 8F3B08, DN08 3/8"
• Promass F 300, 8F3B15, DN15 1/2"
• Promass F 300, 8F3B1F, DN150 6"
• Promass F 300, 8F3B1H, DN100 4"
• Promass F 300, 8F3B25, DN25 1"
• Promass F 300, 8F3B2F, DN250 10"
• Promass F 300, 8F3B40, DN40 1 1/2"
• Promass F 300, 8F3B50, DN50 2"
• Promass F 300, 8F3B80, DN80 3"
• Looking for more options? Please use the individual configurator to continue

• 80

• 50

• 40

• 2F

• 25

• 1H

• 1F

• 15

• 08

		Promass F 300, 8F3B08, DN08 3/8"
			Promass F 300, 8F3B15, DN15 1/2"
			Promass F 300, 8F3B1F, DN150 6"
			Promass F 300, 8F3B1H, DN100 4"
			Promass F 300, 8F3B25, DN25 1"
			Promass F 300, 8F3B2F, DN250 10"
			Promass F 300, 8F3B40, DN40 1 1/2"
			Promass F 300, 8F3B50, DN50 2"
			Promass F 300, 8F3B80, DN80 3"

...

For more details,please contact me directly,

lisa@hkxytech.com

+86 13476275736